Videoswitch Vi600 - Manual (Page 56)

Digital Recorder
49
+12V 0V Tx Rx
Masthead Transceiver
TILLS Input of DVR
Pin 1
Pin 1
CAT5 Cable
Pin 5
Pin 5
10.7 Wireless PIR
Videoswitch DVRs supports up to 64 wireless PIR detectors via a masthead transceiver
unit that connects to the TILLS input (see
www.videoswitch.co.uk for details).
Vi400 or Vi600
Wireless PIR
Masthead Unit
• Each of the external detectors must be configured with a different address
• Each PIR address that is to be used must be enabled in the DVRs menus (see
section 9.4.3).
• Connect Wireless PIR Masthead Units to the TILLS input on the DVR as follows:
Masthead Unit
(Transceiver)
Screw Terminals
Vi400 or Vi600 DVR
“TILLS” RJ45 Connector
(CAT5)
TX Pin 1
0V Pin 5
Link +12V to RX Not connected