Videoswitch Vi600 - Manual (Page 47)

Digital Recorder
40
If you change this password, be very careful to make sure that it is remembered, otherwise
access to the menus will not be possible again without obtaining a special code from your
supplier.
9.6.7.2.2 User 1 Access Rights
The features that this password allows access to are set here using the UP, DOWN, LEFT
and RIGHT arrow keys. A solid block means that the password gains access to a feature, a
dash indicates that access is denied to that feature.
Note that User 1 always has access to the
Keypad and Config menu.
9.6.7.3 User 2
9.6.7.3.1 User 2 Password
If you wish to change the password for USER2, enter a six digit number here. The default
password is “222222”.
9.6.7.3.2 User 2 Access Rights
The features that this password allows access to are set here using the UP, DOWN, LEFT
and RIGHT arrow keys. A solid block means that the password gains access to a feature, a
dash indicates that access is denied to that feature.
9.6.7.4 User 3
9.6.7.4.1 User 3 Password
If you wish to change the password for USER3, enter a six digit number here. The default
password is “333333”.
9.6.7.4.2 User 3 Access Rights
The features that this password allows access to are set here using the UP, DOWN, LEFT
and RIGHT arrow keys. A solid block means that the password gains access to a feature, a
dash indicates that access is denied to that feature.
9.6.7.5 User 4
9.6.7.5.1 User 4 Password
If you wish to change the password for USER4, enter a six digit number here. The default
password is “444444”.
9.6.7.5.2 User 4 Access Rights
The features that this password allows access to are set here using the UP, DOWN, LEFT
and RIGHT arrow keys. A solid block means that the password gains access to a feature, a
dash indicates that access is denied to that feature.
9.6.8 Camera Inputs
9.6.8.1 Brightness
The brightness of a camera image may be adjusted here, for instance to compensate for
cable losses. This is not intended as an alternative to proper camera set up.