Kenwood TM-D710GA - Manual (Page 32)

OTHER OP-5
PROGRAMMABLE FUNCTION KEYS
■ Transceiver Front Panel
There are 2 PF (Programmable Function) keys on the
transceiver front panel: PF1 and PF2. You can assign your
own desired functions to these 2 keys.
1 Enter Menu mode and access Menu 906 (PF1) and/or
Menu 907 (PF2).
2 Set your desired function for the key. Programmable
functions available are: WX CH (Weather Channel)/
FRQ.BAND (Frequency bands)/ CTRL (Control)/
MONITOR (Monitor)/ VGS (Voice recorder)/ VOICE (Voice
announcement)/ GROUP UP (Memory group up)/ MENU
(Menu mode)/ MUTE (Speaker Mute)/ SHIFT (Shift)/
DUAL (Dual Mode)/ M>V (Memory to VFO Copy)/ 1750
(1750 Hz Tone).
■ Microphone Keys
There are 4 microphone PF (Programmable Function) keys:
[PF] (PF1), [MR] (PF2), [VF0] (PF3) and [CALL] (PF4). You
can assign your own desired functions to these 4 keys.
1 Enter Menu mode and access Menu 908 (MIC.PF1) and/
or Menu 909 (MIC. PF2) and/or Menu 910 (MIC. PF3)
and/or Menu 911 (MIC. PF4).
2 Set your desired function for the key. Programmable
functions available are: WX CH (Weather Channel)/
FRQ.BAND (Frequency bands)/ CTRL (Control)/
MONITOR (Monitor)/ VGS (Voice recorder)/ VOICE (Voice
announcement)/ GROUP UP (Memory group up)/ MENU
(Menu mode)/ MUTE (Speaker Mute)/ SHIFT (Shift)/
DUAL (Dual Mode)/ M>V (Memory to VFO Copy)/ VFO/
MR/ CALL/ MHz/ TONE/ REV (Reverse)/ LOW/ LOCK/
A/B (Band Select A/ Band Select B)/ ENTER/ 1750 (1750
Hz Tone)/ M.LIST (Message list)/ S.LIST (Station list)/
MSG.NEW/ REPLY/ POS/ P.MONI/ BEACON/ DX/ WXi.
■ Frequency Direct Entry
If the desired operating frequency is far from the current
frequency, using the microphone keypad is the quickest way to
change the frequency. One of the microphone PF keys must
fi rst be programmed as [ENTER].
1 Press the left or right [BAND SEL] to select band A or B,
then press [VFO] or [CALL].
2 Press the key programmed as [ENTER].
• The Direct Frequency Entry display appears.
3 Press the microphone keys ([0] ~ [9]) to enter your desired
frequency.
4 To set the entered frequency, press [ENTER] or [VFO].
• Pressing [ENTER] before entering all of the digits will set the
remaining digits to 0.
• Pressing [VFO] before entering all of the digits will leave the
remaining digits at their previous values.
• Entering all digits for a frequency will automatically set the
frequency without pressing [ENTER] or [VFO].
• If you need to only change the MHz digit, press the Tuning
control, then enter the new value.
KEY LOCK
The Key Lock function ensures that your transceiver settings
will remain unchanged if you accidentally press a key. When
activated, the following functions can still be used:
• [ ]
• [PTT]
To turn Key Lock ON or OFF, press [F] (1s).
• When Key Lock is activated, the icon will appear on the
display.
■ Microphone Key Lock
The Microphone Key Lock function will lock the microphone
PF (Programmable Function) keys.
1 Enter Menu mode and access Menu 912.
2 Turn the Microphone Key Lock function ON or OFF.