Kenwood TM-D710GA - Manual (Page 74)

WEATHER ALERT (TM-D710GA ONLY)
The Weather Alert is available only in the USA and Canada. When activated, this function will check for a received NOAA 1050 Hz
tone. When the tone is received, the weather alert tone will sound.
WEATHER ALERT ON/ OFF
1 Enter Menu mode and access Menu 111.
2 Set the Weather Alert to ON or OFF.
• When activated, the icon appears on the display.
• When a signal is being received, the icon blinks.
■ Weather Channel
Whether or not the Weather Alert is activated, you can still
access the weather channels. The Weather Alert simply
notifi es you of activity on the weather channels.
1 Press the key programmed with the [WX] unction.
2 Rotate the Tuning control to select your desired channel.
Channel
No.
Frequency
(MHz)
Memory
Name
Location
A 1 162.550 WX 1
NOAA/
Canada
A 2 162.400 WX 2
NOAA/
Canada
A 3 162.475 WX 3
NOAA/
Canada
A 4 162.425 WX 4 NOAA
A 5 162.450 WX 5 NOAA
A 6 162.500 WX 6 NOAA
A 7 162.525 WX 7 NOAA
A 8 161.650 WX 8 Canada
A 9 161.775 WX 9 Canada
A10 163.275 WX 10 –
WEATHER ALERT SCAN
The memory channel only for the weather alert is scanned.
1 Enter Menu mode and access Menu 112.
2 Set the Weather Alert Scan to “OFF” or “15/ 30/ 60 (min)”.
When the weather channel scanning time is set:
Auto scanning starts after the set time.
When the weather channel scanning is set to “OFF”:
Press and hold the key programmed with the [WX] function to
start the weather channel scan.
• Scanning stops when the channel with the highest signal level is
received.
• Memory scanning stops when performing any operation other
than [MONI].
WX-1