Siemens LB75564 - Manual (Page 18)

Extractor hood with slide control, 73 cm
wide, 1 and 2-motor
min
15
mi
n
15
16
35
2 -3
70
0
-3
9
346
160
55
95
150 120
348 348
100
35
225
380
730
1. Remove the filter grille (see operating
instructions).
2. Connect the power.
3. Press the extractor hood up into the
installation opening until the installation
aid locks into position at the front and
rear.
4. Screw in the extractor hood.
5. Insert and secure the filter grille (see
operating instructions).
Installation
310
160
150 120
95
80 60
696
9
230
250
380
730
346
18
1. Loosen the screws.
2. Hold the underside of the extractor
hood, Hold the underside of the extrac-
tor hood.
3. Lower the extractor hood and remove.
Installation spring
Weight in kg:
Width
53 cm 1-motor
Rocker switch
Design changes with respect to technical development
shall remain withheld
Model Exhaust
air
Recircu
lated air
5,0 6,3
1-motor
Slide control
1-motor
Slide control
53 cm
73 cm
2-motor
Slide control
2-motor
Slide control
53 cm
73 cm
9,5
8,3
8,7
10,7
9,5
9,9
Removal
10,3 11,6