Night Guard Home Surveillance System C3-RS-900LCD User Manual

Page 20

Advertising
background image

20

sound shall be emitted from the vehicle. The paging
melody sound continues sounding from your Remote

LCD Transmitter and the“

” indication flashes on the

LCD screen.

3.Turn ON the ignition switch; OR press the

button to

arm the system; OR press the

button to

disarm the system. The outdoor driver paging function will
exit.



S. DOME LIGHT CONVENIENCE DELAY & SUPERVISION

(programmable)

The alarm has a unique feature, which will turn on your vehicle dome light as
following:
1. Upon disarming, the interior light will remain on for 30 seconds.
2. If the vehicle is intruded, the interior light will flash for the same duration as

the siren.

Note: Turning on the ignition switch or arming the alarm will turn off the dome
light.


T. IGNITION CONTROL DOOR LOCK/UNLOCK.

(Programmable)

If the vehicle’s door locks have been interfaced to the security system, the
system will automatically lock the vehicle's doors when the ignition is turned
“ON” and /or unlock the vehicle’s doors when the ignition is turned “OFF”.

U. TRUNK RELEASE (CHANNEL 3) OUTPUT.

Press and hold

button on the transmitter for two

seconds to remotely release the trunk or other electric
devices.


V. CHANNEL 4 TIMER CONTROL OUTPUT

Pressing the transmitter

(4) and

(4) button at the

same time will activate the Channel 4 function. Channel 4 is
user-programmable timer output. You may program the
built-in timer to send a ground signal for any time duration
from 1 second to 120 seconds. For instance, this timer
output may be used to turn on the headlight, power window
or sunroof. (Factory defaults setting at momentary output.)

Advertising