Night Guard Home Surveillance System C3-RS-900LCD User Manual

Page 23

Advertising
background image

23

1. The user must press the transmitter

button twice within 3 seconds to

start the vehicle. or

2. The user must press the transmitter

and

buttons at the same time

to start the vehicle.


B. TO OPERATE THE VEHICLE WHILE RUNNING ON THE REMOTE
START:

To operate the vehicle while the engine is running on the remote start:
1. Insert the ignition key and turn it to “ON” (not the start) position.
2. Press the brake pedal.
Note: If the brake pedal is pressed before the key is in the ON position, the
engine will shut down.


C. TEMPORARY STOP FEATURE:

This feature allows the vehicle to remain running after the key has been
removed from the ignition. This feature is useful for occasions when you wish
to exit and lock the vehicle for short periods of time, but would like to leave the
motor running and the climate control on.

1.Before turning off the engine, press the

button on the transmitter and

the LED indicator will flash 3 times to confirm entry.

2.Turn the ignition key to OFF position. (The engine will stay running.)
3.The engine will run until the pre-programmed time has elapsed or shutdown
input is received. If the brake pedal is depressed the engine will stop.


D: TURBO CHARGE MODE:

(programmable)

Turbo charge mode keeps the engine running after arriving at your destination
for a programmable period of 1, 3 or 5 minutes. This allows the vehicle’s
engine time to conveniently cool down the turbo after you have left the vehicle.
To activate:
1. While the engine is running, pull up the hand brake and place the

transmission gear in the park position.

2. Before turning off the engine, press and release

and

buttons at the

same time.
-- The LED will flash indicating the remote start has entered the turbo
charge mode.

3. Take the “Ignition Key” from the key cylinder.

-- Engine keeps running. --

4. Exit and secure the vehicle.

-- Engine continues running until the pre-programmed time has elapsed. --

NOTE: This feature only applies to vehicles with Turbo Engines.


E. TIMER / TEMPERATURE START: (programmable)

CAUTION SHOULD BE USED IN THIS OPERATION. PLEASE INSURE THAT
YOU ARE FAMILIAR WITH THIS FUNCTION AND HOW IT OPERATES.

This unit can be programmed to start and run the engine every 3 hours or
punctually at the same time next morning, the engine will run for the
programmed running time and then shut down.

IMPORTANT: Timer Start should be used only in open areas, never start and run
the vehicle in on enclosed space such as a garage or carport.

Advertising