Night Guard Home Surveillance System C3-RS-900LCD User Manual

Page 8

Advertising
background image

8

4. Stop The Trigger Melody Sound:

While triggering the alarm the LCD

screen will alert user through melody sound and flashing trigger icon. Press
any button on the LCD remote transmitter to stop melody sound only.



5. Button Lock:

This may be useful if you want to disable

the transmission function of the remote control temporarily to
prevent the inadvertent pressing of the buttons. Press the

button first, within 3 seconds press and hold the

( )

button for 2 seconds to activate or cancel the button lock

function The

icon will displayed on the LCD screen to show

the LCD remote transmitter is on “Button Lock”.


6. Vibration / Melody Mode:

This feature is useful when you are in a noisy place and it is

difficult to hear the beep sound from the remote control. The
remote control in this mode will vibrate when your security
system is triggered.

Press the

button first, within 3 seconds press and

hold the

(

) button for 2 seconds to select the mode

of vibration or melody. The

icon will be displayed

on the LCD screen to showing that the LCD remote
transmitter is in vibration mode.


7. Enable / Disable Bi Sound While Pressing Button:

The remote has a short “bi” sound while pressing the button of the LCD screen
transmitter.

If you want to mute the “bi” sound while pressing the buttons. Press the

button first, within 3 seconds press and hold the

(Bi) button for 2 seconds

to disable the “bi” sound.


8. Low Battery Indication:

When the power of the battery weakens, the remote has two short “bi” sounds

and will flash the

icon while pressing the button of the LCD screen

transmitter.


9. Set Up Fixed Count Down Timer:

1. Press the

button first, within 3 seconds press and hold the

(

)

button for 2 seconds, the LCD screen will shows an

icon and timer (i.e.

0:10),

2. Press the

(

) button again showing next order time on the screen

(ie.0: 20), press them again (ie.0: 30)…and so on.

3. Leave the buttons alone and unit will start counting down. The

icon will

start flashing

Note: 1.The count down period is fixed to 10 minutes, 20 minutes, 30
minutes, 1 hour, 1.5 hours and 2 hours maximum.

a. When the count down timer shows 0:00 the time has elapsed.

Advertising