Night Guard Home Surveillance System C3-RS-900LCD User Manual

Page 7

Advertising
background image

7






C: PROGRAMMING OF THE LCD REMOTE TRANSMITTER:

Transmitter Button

Description

Operation

(1 second)

LCD screen lamp turns on
for
5 seconds.

Press and hold for 1 second
1 melody sound to confirm
enters.

(3 seconds)

Time set mode. This is
used to set the clock and
timers on the remote

Press and hold for 3
seconds
2-melody sounds to confirm
enter.

(5 seconds)

Power Save Mode.

Press and hold for 5
seconds
1 melody sound to confirm
enters.

-

-

Clear the Flash Icon and
Melody Sound on the LCD
Screen Transmitter

Press within 3 seconds

-

(2-second)

Button Lock (

) enable /

disable

Press within 3 seconds

-

(2-second)

Melody / Vibration (

)

Mode

Press within 3 seconds

-

(2-second)

Program Count Down Timer

(

) (10-Minute / 20M / 30

M /1Hour /1.5H / 2.0H)

Within 3 seconds press the

button until desired

time is set, then

flashes

-

(2-second)

Enable / Disable Bi Sound
(Bi) While Pressing Button

1. Screen Lamp ON:

Press and hold the

button for one second. One

melody sound will be heard and the LCD screen lamp will turns on for 5
seconds


2. Power Save Mode:

While the power save mode, the LCD remote

transmitter uses “0” current to save the battery power.

Entry: 1. Press & hold the

button for 5 seconds, with one

melody sound and

icon on the LCD screen to indicate

entry in the “power save mode”.
2. Under the “Active Arming Mode” and Disarm mode. Turn the
ignition switch to ON, the LCD remote transmitter will automatically
enter the “Power Save Mode”

Exit: Press any button of the LCD remote transmitter to exit the

“Power Save Mode”.

3. Clear the Flash Icon and Melody Sound:

Pressing the

button 3

times within 3 seconds will clear the flashing icons and melody sounds on the
LCD screen transmitter

Advertising