Connecting network computers – Actiontec electronic Wireless-Ready User Manual
Page 11
8
Actiontec Wireless-Ready DSL Gateway
3.
Plug a phone filter into the phone jack.
4.
Plug one end of the phone cable into the phone jack and keep the other end
attached to the device.
5.
Repeat steps 1-4 for every other device that shares a phone line with the DSL
connection.
Connecting Network Computers
Other computers can be connected to the Gateway to form a network. The net-
work computers can be connected to the Gateway in three ways: Ethernet, USB, or
wirelessly.
Ethernet
Use the procedure for connecting the first computer to the Gateway via Ethernet
(see “Ethernet” on page xx) to connect network computers, substituting a stan-
dard, straight-through Ethernet cable for the yellow cable. Up to four network
computers can be connected to the Gateway via Ethernet.