Actiontec electronic Wireless-Ready - Manual (Page 8)

5
Chapter 2 Connecting the Gateway
7. Confirm that the Power and Internet Lights on the DSL Gateway are solid
green.
☞
Note: If the Internet Light continues to blink, confirm you have
received notification from your DSL Service Provider that your
DSL service is on. Otherwise, contact your DSL Service Provider
immediately.
Connecting to a Computer
There are two ways to connect the Gateway to a computer: Ethernet or USB cable.
Ethernet
1. Get the Yellow Cable from the Yellow Bag, and plug one end of the Yellow
Cable into one of the Yellow Ports on the back of the DSL Gateway. The
Yellow Cable can be plugged into any of the Yellow Ports.