Actiontec electronic Wireless-Ready - Manual (Page 32)

29
Chapter 6 Advanced Configuration
☞
Note: Not all wireless PC Cards support 128-bit WEP . Ensure
that all PC Cards installed in the networked computers support
128-bit WEP before activating.
LAN IP Address
Selecting LAN IP Address in the “Advanced Configuration” screen generates the
“ LAN IP Address” screen. The value in the LAN IP Address text box is the IP
address of the Gateway as seen on the network.
The
LAN IP address of the Gateway can be modified, but Actiontec recommends
keeping the default factory setting (192.168.0.1).
☞
Note: If the Gateway’s LAN IP Address is modified, verify the
DHCP Server range is within the same subnet. For more infor-
mation, see “ DHCP Server Configuration.”