Actiontec electronic Wireless-Ready - Manual (Page 28)

25
Chapter 6 Advanced Configuration
After selecting a connection type, click Next to continue configuring the connection.
Obtain an IP Address through PPPoE or PPPoA
Select this option to allow the Gateway to use the Point-to-Point over Ethernet
(
PPPoE ) or Point-to-Point over ATM ( PPPoA ) protocol.
If a User Name and Password was entered during Basic Setup, it should be dis-
played in the “Broadband Connection via
PPPoE/PPPoA ” screen. If not, enter the
information now. If the information is unavailable, contact the ISP .