Actiontec electronic Wireless-Ready - Manual (Page 42)

39
Chapter 7 Utilities
To upgrade the Gateway’s firmware:
1. Click the link in the “Upgrade Firmware” window and download the upgrade
files to the hard drive of the computer.
2. Double-click on the upgrade file, named “upgrade.exe.”
3. Enter the IP address of the Gateway and click Start. The upgrade process
begins.
4. After the upgrade is complete, unplug the power adapter from the Gateway,
then plug it back in again.
5. When the power LED stops flashing and glows steadily green, the Gateway is
fully operational.
6. Reconfigure the Gateway settings.