Configuring the gateway – Actiontec electronic Wireless-Ready User Manual
Page 14
Advertising
![background image](/manuals/41152/14/background.png)
11
Configuring
the Gateway
Once the Gateway has been connected to a computer, it must be configured. Use
the following procedure.
1.
If you connected the DSL Gateway correctly, a “Congratulations” window
appears. Click Next.
2.
The first “Actiontec Installation Buddy” window appears. Read the instruc-
tions onscreen, select the type of ISP protocol, then click Next. (If you chose
“RFC 1483,” go to Step 4.)
3
Advertising