Services blocking – Actiontec electronic Wireless-Ready User Manual
Page 34
31
Chapter 6 Advanced Configuration
The beginning and ending
IP
addresses define the
IP
address range of the
Gateway. If the default values are left intact, the Gateway supplies a unique IP
address between 192.168.0.2 and 192.168.0.254 to each computer on the net-
work. Note that the first three groups of numbers of the addresses are identical;
this means they are on the same subnet. The
IP
address of the Gateway must be
on the same subnet as the
IP
address range it generates. For instance, if the
Gateway’s
IP
address is changed to 111.33.222.1, set the beginning
IP
address to
111.33.222.2, and the ending
IP
address to 111.33.222.254.
DNS
Server 1 - the primary
DNS
server provided by the
ISP
. If the
ISP
provided
DNS
server information, enter it here. If not, leave the
text box intact.
DNS
Server 2 - the secondary
DNS
provided by the
ISP
. If the
ISP
pro-
vided secondary
DNS
server information, enter it here. If not,
leave the text box intact.
Services Blocking
Selecting Services Blocking in the “Advanced Configuration” screen generates the
“Services Blocking” screen.
To modify Internet privileges (Web,
FTP
, Newsgroups, etc.) for the computers on
the network:
1.
Enter the computer’s IP address in the Enter
IP
Address: text box.
2.
At the bottom of the screen, select the Internet service(s) to be blocked.
3.
Click Add to enter the computer’s IP address in the “Blocked IP Address List”
text box.
4.
To remove blocked services, select the computer’s IP address in the “Blocked
IP Address List” text box and click Remove.