Kenwood KDC-BT6544U User Manual
Page 17
English
|
17
Dial a number
1
Enter dialing method mode
Press the [
] button.
2
Select the number dial mode
Press the [AUD] knob.
Select the “NUMBER DIAL” display.
3
Enter a phone number
Press the number ([1] – [0]), #([FM]), *([AM]), or
+([¢]) button on the remote controller.
4
Make a call
Press the [DIRECT] button on the remote
controller.
To erase the entered phone number digit by
digit:
Press the [4] button on the remote controller.
⁄
• You can input max 32 digits.
Speed dialing (Preset dial)
1
Enter dialing method mode
Press the [
] button.
2
Press the [AUD] knob.
Select the “NUMBER DIAL” display.
3
Enter preset dial mode
Press the [SEARCH] button.
Calling a number in the Phone Book
1
Enter dialing method mode
Press the [
] button.
2
Select the Phone Book mode
Press the [AUD] knob.
Select the “PHONE BOOK1” display, proceed to step
3.
Select the “PHONE BOOK2” display, proceed to step
4.
3
Select the initial to be searched for
Operation type
Operation
Move to the next character.
Turn the [AUD] knob or push it towards
right or left.
Move to the next row.
Push the [AUD] knob towards up or
down.
Determine the selected initial. Press the [AUD] knob for at least 1
second.
4
Select the name
Operation type
Operation
Move to the next phone
number.
Turn the [AUD] knob or push it towards
up or down.
Move to the next name.
Push the [AUD] knob towards right
or left.
5
Make a call
Press the [AUD] knob for at least 1 second.
⁄
• During search, a non-accent character such as “u” is
searched for instead of an accent character such as “ü”.
Making a call
1
Enter dialing method mode
Press the [
] button.
2
Select a dialing method
Press the [AUD] knob.
“NUMBER DIAL” » “PHONE BOOK1” » “PHONE BOOK2”
» “OUT-CALL” » “IN-CALL” » “MISSED CALLS”
Methods of operations in the above modes are
described below.
3
Exit the dialing method mode
Press the [
] button.
4
Select the number you want to recall from the
memory
Turn the [AUD] knob or push it towards up or
down.
5
Press the [AUD] knob.
Phone number is displayed.
6
Make a call
Press the [AUD] knob for at least 1 second.
⁄
• You need to register the preset dial number. (page 18)
B64-4317-00_00_E_English.indd 17
08.11.1 3:47:58 PM