Kenwood KDC-BT6544U - Manual (Page 5)

English |
5
Function Control : [SEARCH]
Press this button for 1 second allows you to set
various functions using the [AUD] knob. Refer to
<Function Control> (page 6).
Category Function of setup item
AUTO MEMORY Putting stations with good reception in the memory
automatically.
iPodCTRL * Allows you to set up iPod Control by Hand Mode.
PLAY MODE Allows you to set up the play mode.
DSP * Allows you to set up the sound environment.
MENU Allows you to set up the environment.
RETURN Exit Function Control mode.
* Function of KDC-BT6544U/ BT6544UY/ W5544U/ W5644U.
* Function of KDC-BT6544U/ BT6544UY.
Favorite Control : [FAVORITE]
Registers to or retrieves from the memory the
operation procedure to select your favorite broadcast
station or iPod Playlists/ Artists, etc regardless of the
selected source. Refer to <Favorite Control>(page 26).
Tuner functions
FM band: [AUD] knob
Switches between FM1, FM2, and FM3 each time
pushing toward up.
AM band: [AUD] knob
Switches to AM when pushing toward down.
Tuning: [AUD] knob
Changes the frequency when pushing toward left or
right.
⁄
• Use the “MENU” > “SEEK” of <Function Control> (page 6) to
change the frequency switching.
• During reception of stereo stations the “ST” indicator is ON.
Traffic information : [TI]
• For KDC-BT6544U/ BT6544UY/ BT6044/BT6144: Turns
ON or OFF the Traffic Information function when
pressing for at least 2 seconds.
• For KDC-W5544U/W5644U: Turns ON or OFF the
Traffic Information function when pressing.
When the function is turned ON, “TI” indicator is ON.
If traffic bulletin starts when the function is ON,
“TRAFFIC” is displayed and traffic information is
received.
⁄
• If the volume is adjusted during reception of traffic
information, the adjusted volume is memorized
automatically. The memorized volume will be applied next
time the Traffic Information function is turned ON.
Disc & Audio file play functions
Disc play: Disc slot
Starts playing when a disc is inserted.
When a CD is inserted, the “IN” indicator is ON.
⁄
• 3 inch (8 cm) CD cannot be used. Attempt to insert using
an adapter can cause malfunction.
Disc ejection: [0]
⁄
• You can eject the disc for 10 minutes after switching off the
engine.
USB device/iPod play: USB Terminal
(
Function of KDC-BT6544U/ BT6544UY/ W5544U/ W5644U)
Connecting a USB device starts playback.
⁄
• For the playable audio file, media, and devices, refer to
<About Audio file> (page 35).
Pause and play: [38]
Switches between pause and play each time this
button is pressed.
USB device removing: [0]
Press this button for 2 seconds or longer to select the
remove mode, and the remove the USB device.
During the remove mode, “USB REMOVE” is displayed.
Music search: [AUD] knob
Changes the music when pushing toward left or right.
Fast reverses or forwards the music while keeping
pushing toward left or right. (No sound is output
while playing audio file.)
Folder search: [AUD] knob
Changes the folder containing the audio file when
pushing toward up or down.
• For the operation on iPod, enter <Music Search for iPod>
(page 11) is first to enter the search mode.
Search mode: [SEARCH]
After pressing [SEARCH] button, you can quickly
search songs with the [AUD] knob. See <Music
Search> (page 11) for details.
Hands-free phoning
Microphone:
(
Function of KDC-BT6544U/ BT6544UY/ BT6044/BT6144)
The microphone for the hands free phone is built in.
When your voice cannot be recognized due to the
low microphone volume or noises in the vehicle,
adjust the microphone settings by selecting “MENU”
>“MIC GAIN” of <Function Control> and “MENU” >“NR
LEVEL” of <Function Control> (page6).
B64-4317-00_00_E_English.indd 5 08.11.1 3:47:48 PM