Kenwood KDC-BT6544U - Manual (Page 9)

Displayed item is depending on currently selected
source or mode. The mark in Condition column
shows the condition to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB/iPod.
: Can be set while Audio file source of CD/USB
(excluding iPod).
: Can be set while CD/ Disc changer source.
: Can be set while Disc changer source.
: Can be set during Tuner source.
: Can be set during FM reception.
: Can be set while accessing AUX source.
: Can be set only during playback of the iPod source.
(USB source used when the iPod is connected)
: Can be set for sources other than the standby
source by setting “2 ZONE” of <Audio Setup> (page
21) to “ON”.
: Can be set while a cell-phone is connected.
: Refer to the reference page.
— : Can be set during all sources.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Only the items available to the current source are
displayed.
1 Enter Function Control mode
Press the [SEARCH] button for at least 1 second.
”FUNCTION” is displayed.
2 Select your desired setup item
Operation type Operation
Movement between items Turn the [AUD] knob.
Selection of item Press the [AUD] knob.
Return to previous item Press the [SEARCH] button.
Repeat selection and determination until your
desired setup item is selected.
Example:
DOT LINE
MENU
In this manual, the above selection is
indicated as
Select “MENU”
> “DOT LINE”.
3 Make a setting
Press the [AUD] knob or turn the [AUD] knob to
select a setting value, and then press the [AUD]
knob.
• The value of items with
mark can be set by
press the [AUD] knob.
• The value of items with mark can be set by
pushing the [AUD] knob towards right or left.
• Some items require you to keep pressing the
[AUD] knob for 1 or 2 seconds so that you can
make a setting. For these items, the time during
which you need to keep pressing the [AUD] knob
is displayed in the Entry column in seconds.
• For the functions accompanied by the
description of the setting procedure and so forth,
the reference page numbers are displayed.
4 Exit Function Control mode
Press the [SEARCH] button for at least 1 second.
*Factory setting
* Function of KDC-BT6544U/ BT6544UY.
* Function of KDC-BT6044/ BT6144.
* Function of KDC-W5544U/ W5644U.
* Function of KDC-BT6544UY/ BT6144/ W5644U.
* iPod play mode cannot be set when <iPodCTRL> is set to
“OFF”.
* Refer to <Menu Glossary> (page 36).
English |
9
B64-4317-00_00_E_English.indd 9 08.11.1 3:47:56 PM