Kenwood KDC-BT6544U - Manual (Page 4)

4
| KDC-BT6544U/ KDC-BT6544UY/ KDC-BT6044/ KDC-BT6144/ KDC-W5544U/ KDC-W5644U
General functions
Power/Source Select button: [SRC]
Turns on the power.
When the power is on, the source switches between
Tuner (“TUNER”) , USB or iPod* (“USB” or “iPod”),
CD (“CD”) , Auxiliary input (“AUX”), and Standby
(“STANDBY”) each time this button is pressed.
Press at least 1 second to turn off the power.
⁄
• When an optional accessory is connected, the source name
for each device appears.
• When connection of the iPod is recognized, the source
display changes from “USB” to “iPod”.
* Function of KDC-BT6544U/ BT6544UY/ W5544U/W5644U.
Volume control: [AUD] knob
Turn the knob to adjust the volume.
Subwoofer output: [AUD] knob
Switches between ON (“SUBWOOFER ON”) and OFF
(“SUBWOOFER OFF”) each time pushing toward down
for at least 2 seconds.
• You can do this function when “SWPRE” in <Function
Control> (page 6) is set to “SW”.
Auxiliary input
Connect a portable audio device with mini-plug
cable (3.5 ø).
⁄
• Use the mini-plug cable which is stereo type and does not
have any resistance.
• The auxiliary input requires the setting made in “MENU” >
“AUX” of <Function Control> (page 6).
Faceplate release: Release
Releases the faceplate lock so that it can be removed.
Refer to the following diagram when reattaching the
faceplate.
¤
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts.
• Keep the faceplate in its faceplate case while detached.
• Do not place the faceplate (and the faceplate case) in areas
exposed to direct sunlight, excessive heat or humidity. Also
avoid places with too much dust or the possibility of water
splashing.
• To prevent deterioration, do not touch the terminals of the
unit or faceplate with your fingers.
Text/Title scroll: [AUD] knob
Scrolls the CD, audio file, and Radio text display when
pushing toward up for at least 2 seconds.
Muting volume upon reception of phone call
(Function of KDC-W5544U/ W5644U)
When there is a call, “CALL” is displayed and the audio
system is paused.
When the call ends, “CALL” disappears and the audio
system comes back on.
The audio system comes back on when [SRC] is
pressed during a call.
⁄
• To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
accessory. Refer to <Connecting Wires to Terminals> (page
40).
Basic Operation
[SRC] [FAVORITE] [SEARCH] [AUD] []
[]
[TI]
[

] Release
Auxiliary input
Disc slot Microphone
USB Terminal
B64-4317-00_00_E_English.indd 4 08.11.1 3:47:47 PM