Kenwood KDC-BT6544U - Manual (Page 31)

English |
31
Select “PB NAME CHK” (Play)
5 Press the [AUD] knob.
Play the registered voice and return to step 2.
Select “PB NAME DEL” (Delete)
5 Delete a voice tag
Press the [AUD] knob at least 1 second.
Return to step 2.
Exit the voice tag mode
Press the [SEARCH] button.
⁄
• Audio sound is not output during voice tag registration.
Setting a Voice Command for
Category
Add a voice tag to the phone number category
(type) for voice calling.
1 Enter voice tag mode
Select “MENU” > “VOICE TAG”.
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
2 Select “PB TYPE EDIT” mode
Press the [AUD] knob to select “PB TYPE EDIT”,
and then press the [AUD] knob for at least 1
second.
3 Select the category (type) you wish to set
Turn the [AUD] knob or push it towards up or
down.
“GENERAL”/ “HOME”/ “OFFICE”/ “MOBILE”/ “OTHER”
4 Press the [AUD] knob.
5 Select a mode
Turn the [AUD] knob or push it towards up or
down.
Display Operation
“PB TYPE REG” Register a voice tag.
“RETURN” Return to step 2.
6 Register the category (type) by performing
steps 5 to 7 in <Adding a voice dialing
command> (page 30).
Exit the voice tag mode
Press the [SEARCH] button.
⁄
• Set the voice tag for all the 5 categories. If the voice tag
is not registered for all the categories, the Phonebook
may not be recalled by voice command.
SMS (Short Message Service)
The SMS arrived at the cell-phone is displayed on
the receiver.
A newly arrived message is displayed.
¤
• To prevent car accidents, the driver should not read the
SMS while driving.
When a new message arrives
“SMS RECEIVED” is displayed.
The display disappears with any operations.
Displaying the SMS
1 Enter SMS Inbox mode
Select “MENU” > “SMS INBOX”.
Press the [AUD] knob for at least 1 second.
For how to select Function Control item, refer to
<Function Control> (page 6).
A message list appears.
2 Select a message
Turn the [AUD] knob or push it towards up or
down.
• Each pressing of the [
38] button for at least 1
second switches between telephone number or
name and message reception date.
3 Display the text
Press the [AUD] knob.
Pressing this button again allows you to select a
message again.
• Message Scroll
Continuously pushing the [AUD] knob towards
right or left scrolls the message.
4 Exit the SMS Inbox mode
Press the [SEARCH] button.
⁄
• The unopened message is displayed at the beginning
of the list. Other messages are displayed in the order of
reception.
• The SMS that has arrived when the cell-phone is not
linked with Bluetooth cannot be displayed. Download
the SMS.
• The short message cannot be displayed during
downloading the SMS.
B64-4317-00_00_E_English.indd 31 08.11.1 3:48:00 PM