Dual clock display, Clock & date display type setting – Kenwood KDC-5751SD User Manual
Page 29
English
|
29
Dual clock display
Sets time for two different cities.
1
Enter Function setting mode
Press the Control knob for at least 1 second.
2
Select the City Select mode
The item can be selected and determined as
follows.
“Settings”
>
“Clock&Date”
>
“City Select”
To select the item, turn the Control knob. To
determine the item, press the Control knob.
3
Select the clock display part
Push the Control knob towards up or down.
4
Set cities for Home/ Sub
Turn the Control knob.
5
Determine cities for Home/ Sub
Press the Control knob.
6
Exit Function setting mode
Press the [ ] button for at least 1 second.
⁄
•
For adjustment of Home time, refer to
<Adjusting the
Clock> (page 28)
.
•
Time of Sub City is automatically derived from Home time.
When summer time systems are different between Home
and Sub cities, adjustment can be done by referring to
“Sub Clock Adjust”
of
<Clock & Date display type setting>
(page 29)
.
Clock & Date display type setting
Sets the display type of the clock and calendar.
1
Enter Function setting mode
Press the Control knob for at least 1 second.
2
Select the Clock & Date setting mode
The item can be selected and determined as
follows.
“Settings”
>
“Clock&Date”
To select the item, turn the Control knob. To
determine the item, press the Control knob.
3
Select the desired Clock & Date setting item
Turn the Control knob to select Clock & Date
display setting item, and then press the Control
knob.
Display
Overview
“Clock&Date”
“Time Synchronized” Synchronizing the Radio data system station
time data and this unit’s clock.
“ON” / “OFF”
“Summer Time”
Advances the clock one hour when set to ON.
“ON” / “OFF”
“Sub Clock Adjust” Adjusts the time difference caused by summer
time.
“-1h” / “0h” / “+1h”
“Date Mode”
Sets the date display mode.
7 types
( : Factory setting)
4
Set the Clock & Date setting items
Turn the Control knob to select desired value,
and then press the Control knob.
The previous item is displayed.
5
Exit Function setting mode
Press the [ ] button for at least 1 second.