Kenwood KDC-5751SD - Manual (Page 37)

English |
37
Speed dialing (Preset dial)
1
Enter Bluetooth mode
KDC-BT51U
Press the [ ] button.
KDC-5751SD KDC-5051U
Press the [LOG] button for at least 1 second.
“BT MODE” is displayed.
2
Select the Preset dial mode
Turn the Control knob to select “Preset Call”,
and then press the Control knob.
3
Select the number you want to recall from the
memory
Turn the Control knob to select recall number
(“P1” – “P6”), and then press the Control knob.
4
Make a call
KDC-BT51U
Press the [ ] button.
KDC-5751SD KDC-5051U
Press the Control knob.
⁄
• You need to register the preset dial number. Refer to
<Registering to the Preset dial number list> (page 37) .
Registering to the Preset dial number
list
1
Enter the phone number you wish to register
Enter the phone number with reference to the
following:
Dialing a number/ Calling a number in the call log/
Calling a number in the Phone Book
2
Enter Preset memory mode
Press the [PRESET] button.
3
Select a number and store it in the memory
Turn the Control knob to select memory
number (“P1” – “P6”), and then press the
Control knob for at least 2 seconds.
Cancelling the Preset memory mode
Press the [ ] button.