Kenwood KDC-5751SD - Manual (Page 49)

English |
49
Setting a voice command for category
Add a voice tag to the phone number category
(type) for voice calling.
1
Enter Bluetooth mode
KDC-BT51U
Press the [ ] button.
KDC-5751SD KDC-5051U
Press the [LOG] button for at least 1 second.
“BT MODE” is displayed.
2
Enter Function setting mode
Press the Control knob for at least 1 second.
3
Select Phonebook type edit mode
The item can be selected and determined as
follows.
“Settings”
> “Voice Tag” > “PN Type Edit”
To select the item, turn the Control knob. To
determine the item, press the Control knob.
4
Select the category (type) you wish to set
Turn the Control knob to select category name,
and then press the Control knob.
“General”/ “Home”/ “Office”/ “Mobile”/ “Other”
5
Select a mode
Turn the Control knob.
Display Operation
“Register” Register a voice tag.
“Check”* Play a voice tag.
“Delete”* Delete a voice tag.
* KCA-BT300/BT200 only. Displayed only when a name for
which a voice tag has been registered is selected.
6
Register the category (type) by performing
steps 6 to 7 in
<Adding a voice dialing
command> (page 48) .
7
Exit Bluetooth mode
Press the [SRC] button.
⁄
• Set the voice tag for all the 5 categories. If the voice tag is
not registered for all the categories, the Phonebook may
not be recalled by voice command.