Kenwood KDC-5751SD - Manual (Page 39)

English |
39
Making a voice dialing call
1
Enter Bluetooth mode
KDC-BT51U
Press the [ ] button.
KDC-5751SD KDC-5051U
Press the [LOG] button for at least 1 second.
“BT MODE” is displayed.
2
Enter voice recognize mode
Turn the Control knob to select “Voice
Recognize”, and then press the Control knob.
3
Have the unit recognize your spoken name
Press the Control knob. If you hear a beep,
speak a registered name within 2 seconds.
4
Have the unit recognize the spoken category
When you hear a beep, speak the category
within 2 seconds.
The recognized phone number (name) is displayed.
When you want to change the displayed phone
number (name), press the [DISP] button.
5
Make a call
Press the Control knob.
⁄
• If your voice cannot be recognized, a message is displayed.
Refer to
<Troubleshooting guide> (page 54) .
Pressing the Control knob allows you to retry voice input.
• Both the name and category requires registration of a voice
tag. Refer to
<Setting a voice command for category>
(page 49) .
Clearing the Disconnection message
KDC-BT51U
Press the [ ] button.
KDC-5751SD KDC-5051U
Press the [LOG] button for at least 1 second.
“HF Disconnect” disappears.