Demonstration mode setting, General operation – Kenwood KDC-5751SD User Manual
Page 32
Advertising
32
|
KDC-BT51U/ KDC-5751SD/ KDC-5051U
General operation
Demonstration mode Setting
Turning the demonstration mode ON/OFF.
1
Enter Function setting mode
Press the Control knob for at least 1 second.
2
Select the Demonstration mode
Turn the Control knob to select “DEMO Mode”,
and then press the Control knob.
3
Set the Demonstration mode
Turn the Control knob to select desired value
(“ON” or “OFF”), and then press the Control
knob.
Exit Function setting mode.
Advertising
This manual is related to the following products: