Teledex E Series - Manual (Page 13)

E SERIES ANALOG USER GUIDE www.teledex.com 13
1. Lift the handset.
2. Press the STORE Key once.
3. Program PAUSE by pressing 1 for 1
second, 2 for 2 seconds, etc.
4. Press STORE.
5. Press PAUSE/REDIAL.
6. Hang up phone to exit programming.
FLASH HOOK FUNCTION—[FLASH]
The Flash function is used to access PBX features
or Telco line features such as Call Waiting. The
Flash function is a 600 ms timed line break. If the
Flash function will be used often, store the feature
into memory located for easy access as follows:
1. Lift the handset then press the STORE Key.
2. Press the FLASH Key.
3. Press the memory location wherein the
[Flash] is to be stored.
4. Hang up the handset.
MESSAGE
Pressing the touch bar automatically turns on
the speakerphone and then dials into a user-
programmed voice mail system to retrieve
messages.
1. Lift the handset.
2. Press the STORE Key.
3. Enter the number to be stored using the
numeric dial pad.
4. Press the red Message Waiting bar to
store.
5. Hang up the handset.
Care and Maintenance
• Keep the telephone dry. If it gets wet, wipe
it dry immediately. Liquids might contain
minerals that can corrode the electronic
circuits.
• Use and store the telephone in a normal
temperature environment. Temperature
extremes can shorten the life of electronic
devices and distort or melt parts.
• Keep the telephone away from excessive
dust and dirt which can cause premature
wear of parts.
• Wipe the telephone with a damp cloth
occasionally to keep it looking new. Do not use
harsh chemicals, cleaning solvents, or strong
detergents to clean the system.
E100 AND E100TRM PHONES