Teledex E Series - Manual (Page 27)

E SERIES ANALOG USER GUIDE www.teledex.com 27
3. Press the memory location wherein the
FLASH is to be stored.
4. Hang up the handset.
MESSAGE WAITING AND RETRIEVAL
Pressing the touch bar automatically turns on
the speakerphone, and then dials into a user-
programmed voicemail system to retrieve
messages.
1. Lift the handset.
2. Press the STORE key.
3. Enter the number to be stored using the
numeric dial pad.
4. Press the red Message Waiting bar to store.
5. Hang up the handset.
In Case of Power Outage
The phone base will function without commercial
power (but the handset will not operate).
Ringer: When receiving a new call, the phone
base will ring, but not the handset.
Pick up: Press the Line or Speaker key to pick up.
Dial: Under off-hook status the loudspeaker and
microphone will receive sound and calls can be
placed using the dial pad.
Hang-up: After talking, press the Speaker or Line
key to hang up.
Note: Without commercial power, the base unit only
supports dialing and calling; the indicator lights will
fail to light; and Redial, Hold, Flash, and the handset
will not operate.
Care and Maintenance
• Keep the telephone dry. If it gets wet, wipe it
dry immediately. Liquids might contain minerals
that can corrode the electronic circuits.
• Use and store the telephone in a normal
temperature environment. Temperature
extremes can shorten the life of electronic
devices and distort or melt parts.
• Keep the telephone away from excessive
dust and dirt that can cause premature wear
of parts.
• Wipe the telephone with a damp cloth
occasionally to keep it looking new. Do not use
harsh chemicals, cleaning solvents, or strong
detergents to clean the system.
E203 AND E203 REDIDOCK PHONES