Teledex E Series - Manual (Page 24)

24 www.teledex.com E SERIES ANALOG USER GUIDE
5. Press on back end of battery to snap into
place.
6. Put the back shell of handset into slot,
then press down and snap into place.
Features
• Phone circuit can directly drive hands-free
• Digital wireless/no interference technology
• 12 programmable speed dial keys for storing
up to 24 elements (digits and characters such
as *, #, Flash, and Pause)
• Message Waiting Indicator and OneTouch
message retrieval key integrated into design
• Handset auto-sync registration
• Each base unit can register up to 4 additional
handsets
• Handset battery low-voltage warning
• Message high- and low-voltage detection
• Message for reverse polarity Line 1 or Line 2
• Extension detection function
• 6-ringer option (using the handset numeric
keypad 1– 6)
Operation
VOLUME CONTROL
Ringer volume control: The ringer volume is
controlled via the “ Volume +/–” key.
There are five volume levels. When you have
reached the maximum or minimum sound level
there will be a warning beep.
HANDSET VOLUME CONTROLS
The handset volume control increases the volume
of the handset.
When the handset is off-hook or the Speaker key
engaged on speakerphones, press the Volume
Control keys to increase or decrease the volume.
The handset volume control is a 5-step operation.
All models are hearing aid compatible.
ON-HOOK AND OFF-HOOK/PICK-UP
AND HANG-UP
Base unit: To get a dial tone with off-hook status,
press a line key or the Speaker key to pick up with
speaker. To hang up or go on-hook, press a line
or the Speaker key again to hang-up.
Handset: Press ON/OFF key in the handset
faceplate to pickup or hang-up.
HOLD
Base unit and handset: Controls the “local hold”
function. Each press of the [Hold] key toggles the
local hold mode On or Off. An LED indicator located
above the [Hold] key displays the on-hold status.
MUTE
The Mute key toggles the microphone Mute
function On and Off. The LED indicator above
the [Mute] key displays the On/Off status of the
Mute function. When Mute is on, the handset and
hands-free microphone audio are turned off. You
will be able to hear the party at the other end of
your call, but they will not be able to hear you.
REDIAL
Redials the last-dialed telephone number, up to 24
digits. After 30 minutes, the redialed number will
automatically be removed (for security and privacy).
MESSAGE
1. The hidden 3-position switch marked
TYPE LR1 LR2 configures the message-
waiting lamp.
2. For most applications the TYPE position
will work. This is the factory default
setting. Always try the TYPE position
first: If the message lamp blinks when a
message is in the mailbox, this confirms
that TYPE is the correct setting.
3. For some PBX systems that provide
reverse polarity message signaling, it may
E203 AND E203 REDIDOCK PHONES