Figure 3-2. card removal with ejector rod – MagTek IntelliStripe 350 User Manual
Page 19
Advertising
![background image](/manuals/413735/19/background.png)
Section 3. Operation and Maintenance
1
.Observe Position
Of Jammed Card.
Back View
3
.Push Rod Until Card
Appears In Front.
Then Pull Card Out.
2
. Insert Rod Into Slot.
Reposition Until Card
Is In Notch In Rod.
Figure 3-2. Card Removal with Ejector Rod
3. Insert the Rod into the slot as shown in Figure 3-2.
4. Reposition as required until the card is in the notch.
5. Push the Rod until the card appears in the front, then pull it out.
13
Advertising