MagTek IntelliStripe 350 - Manual (Page 9)

Section 1. Features and Specifications
SMART CARD INTERFACE
The Reader can provide connections to ICC contacts as defined by ISO 7816 specifications. The
Reader supports ISO7816 T=0 and T=1 cards not requiring V
PP
, with a speed range of 9600 bps
to 115200 bps. It also supports a variety of common memory card types. See IntelliStripe 320
Command Reference Manual, Part Number 99875168, for more details.
MAGNETIC STRIPE READER
The Reader can read up to three tracks of magnetic stripe card data. See IntelliStripe 320
Command Reference Manual, Part Number 99875168, for more details.
FLASH UPGRADABLE
The unit's firmware is in-system Flash Upgradable. This allows the unit’s firmware to be
upgraded when required.
INTERFACE
The unit communicates to the host through either a USB or an RS-232 interface. For RS-232,
the device uses 8 data bits, 1 stop bit, even parity. The unit can automatically sync to baud rates
9600, 14400, 19200, 28800 38400, and 57600. See MCP Driver Reference Manual, Part
Number 99875164, and MCP Serial Transport Protocol Reference Manual, Part Number
99875163, for more details.
SPECIFICATIONS
Specifications for the Reader are listed in Table 1-1. Overall dimensions of the unit are shown in
Figure 1-2.
3