MagTek IntelliStripe 350 - Manual (Page 4)

iv
FCC WARNING STATEMENT
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
FCC COMPLIANCE STATEMENT
This device complies with Part 15 Of The FCC Rules. Operation of this device is subject to the following two
conditions: (1) This device may not cause harmful interference. And (2) This device must accept any interference
received, including interference that may cause undesired operation.
CANADIAN DOC STATEMENT
This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out in the Radio
Interference Regulations of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux
appareils numériques de las classe A prescrites dans le Réglement sur le brouillage radioélectrique édicté par les
ministère des Communications du Canada.
CE STANDARDS
Testing for compliance to CE requirements was performed by an independent laboratory. The unit under test was
found compliant to Class A.
UL/CSA
This product is recognized per Underwriter Laboratories and Canadian Underwriter Laboratories 1950.
EMVCo APPROVAL STATEMENT
EMVCo approval of the interface module (IFM) contained in this Terminal shall mean only that the IFM has been
tested in accordance with the EMV Level 1 Specifications, Version 3.1.1, as of the date of testing. EMVCo
approval does not under any circumstances include any endorsement or warranty regarding the completeness of
the approval process or the functionality, quality or performance of any particular product or service. EMVCo
does not warrant any products or services provided by third parties. EMVCo approval does not under any
circumstances include or imply any product warranties from EMVCo, including, without limitation, any implied
warranties of merchantability, fitness for purpose, or non-infringement, all of which are expressly disclaimed
by EMVCo. All rights and remedies regarding products and services, which have received EMVCo approval,
shall be provided by the party providing such products or services, and not by EMVCo.