MagTek IntelliStripe 310™ - Manual (Page 12)

IntelliStripe 310 Motorized Reader
2
RS232 / Power cable
−6 foot IntelliStripe 310 host port to 9 pin D female RS232 and 2.5mm
1408
P, 4-disk set, part number 30037437
icture Demo with MCP driver, 4-disk set, part number
30037435
P, Serial Transport Protocol, Reference Manual
9875164 Communication Protocol, Driver Reference Manual
tripe 310, Command Reference Manual
The Reader has a command-driven ansport keeps the card from the
ser during a transaction but returns the card when the transaction is completed.
R
T
to the h The device uses 8 data bits, 1
stop bit, even parity. The unit can automatically sync to baud rates 9600, 14400, 19200, 28800
3
rial
T
ACCESSORIES
Other part numbers that may be shipped with the unit are as follows:
•
power jack, part number 1605
•
Power Supply–Auto Ranging 100V-250V, regulated, 12VDC, 2.5mm plug, part number
64300080. Requires adapter to mate with power outlet; use Adapter/Power Cord part
number 71100001, for North American applications
Drivers, MC
•
•
Demo Software, IntelliStripe P
•
Communications Software, MCP3 Program, 4-disk set, part number 30037442 (must use
with 30037437)
RELATED DOCUMENTS
The following documents are relevant to this product:
99875163
MC
9
99875218
IntelliS
MOTORIZED TRANSPORT
motorized transport. The tr
u
S-232 INTERFACE
he unit communicates ost through an RS-232 interface.
8400, and 57600. See MCP Driver Reference Manual, Part Number 99875164, MCP Se
ransport Protocol Reference Manual, Part Number 99875163, for more details.