MagTek IntelliStripe 310™ - Manual (Page 14)

IntelliStripe 310 Motorized Reader
4
CARD POSITION SENSORS
he reader contains three card position sensors: front card present sensor, middle card present
sensor, and rear card present sensor.
Front Card Present Sensor
An optical sensor that indicates whether a card is present at the front (insertion) end of the card
transport. See IntelliStripe 310 Command Reference Manual, Part Number 99875218, for more
details.
Middle Card Present Sensor
An optical sensor that indicates whether a card is present in the middle of the card transport. See
IntelliStripe 310 Command Reference Manual, Part Number 99875218, for more details.
Rear Card Present Sensor
An optical sensor that indicates whether a card is present at the rear (smart card contacts) end of
the card transport. See IntelliStripe 310 Command Reference Manual, Part Number 99875218,
for more details.
SPECIFICATIONS
Specifications for the Reader are listed in Table 1-1.
Table 1-1. Specifications
DATA FORMAT SPECIFICATIONS
T
Reader Configuration
Mag-Stripe Functions:
Track 1,2,3 only Data Format Specifications*
ISO/AAMVA/CDL/JIS formats
ISO 7810, 7811, JIS x 6302 Type 2
* ISO (International Standards Organization), AAMVA, (American Association of Motor Vehicle
Administrators), CDL (California Drivers License), JIS (Japanese Industrial Standard)
OPERATIONAL
Card Speed: 10 IPS (25,4 cm/sec) typical
Recording Method: Two-frequency coherent phase (F2F)
MTBF: Electronics: 125,000 hours
Head: 1,000,000 passes (500,000 Insertion Cycles)
SC contacts: 1,000,000 passes