Accessories – MagTek IntelliStripe 310™ User Manual
Page 19
Advertising
Section 2. Installation
9
Figure 2-3 shows the position for mounting the IntelliStripe 310 with the “B” Bezel attached.
The mounting holes are shown in the bottom view. The "A" Bezel is attached to the unit by the
"A" Bezel Retaining screws also shown in the bottom view.
.102"
2.59 mm
.365"
9.27 mm
.800"
20.32 mm
1.165"
29.59 mm
1.233"
31.32 mm
1.95"
49.53 mm
3.06"
77.72 mm
1.00"
25.48 mm
5.60"
142.24 mm
5.85"
148.59 mm
2.022"
51.36 mm
1.81"
45.97 mm
#6 – 32 Thread
Mounting Holes –
.38" Internal
Thread Clearance
"A" Bezel
Retaining Screws
"A" Bezel
Retaining
Screw
Bottom View – "A" Bezel Only
Top View – "A" & "B" Bezels
Side View
Figure 2-3. “B” Bezel Mounting – Top, Side, and Bottom Views
Advertising