Test led – MagTek IntelliStripe 310™ User Manual
Page 23
Section 2. Installation
13
card
p of the panel opening to the centerline
For “C” bezel configuration, the dimensions in Figure 2-7 are for the unit mounted from the
backside of the panel. These dimensions include the dimensions from the centerline of the
slot to other areas for mounting the unit from the backside of the panel. Note the dimension
from the bottom of the panel opening to the centerline. The same value in the "B" bezel is from
the to
Front
Panel
R .125"
3.175 mm
4 pl
1.029"
26.14 mm
.800"
20.32 mm
1.810"
45.97 mm
1.550"
39.37 mm
3.100"
78.74 mm
"C" Panel Opening
Figure 2-7. Panel Opening for Mounting "C" Bezel
t necessary to remove the Bezels when mounting the unit. The "B" or "C" Bezel
protrudes from the opening, and the "A" Bezel is positioned against the inside of the panel
opening. The bracket should retain the unit so the "A" Bezel is held firmly against the inside of
the panel.
It is no