MagTek IntelliStripe 310™ - Manual (Page 25)

Section 2. Installation
15
” bezel is used, the
ounting screws are inserted from under the IntelliStripe 310. If the “C” bezel is used, the
Four #6-32 mounting screws, with 0.38 inch internal thread clearance, attach the bottom of the
IntelliStripe 310 to a fixed position as indicated in Figure 2-9. If the “B
m
IntelliStripe 310 is inverted, and the mounting screws are inserted from above the IntelliStripe
310.
Figure 2-9. Mounting Configurations