MagTek IntelliStripe 310™ - Manual (Page 22)

IntelliStripe 310 Motorized Reader
12
ot to other areas for mounting the unit from the backside of the panel. Note the dimension
For “B” bezel configuration, the dimensions in Figure 2-6 are for the unit mounted from the
backside of the panel. These dimensions include the dimensions from the centerline of the card
sl
from the top of the panel opening to the centerline. The same value in the "C" bezel is from the
bottom of the panel opening to the centerline
ø.166" 4pl
4.22 mm
Front
Panel
R .125"
3.175 mm
4 pl
1.029"
26.14 mm
1.530"
38.86 mm
2.022"
51.36 mm
1.81"
45.97mm
.800"
20.32 mm
.800"
20.32 mm
1.550"
39.37 mm
3.100"
78.74 mm
1.810"
45.97 mm
.400"
10.16 mm
.765"
19.43 mm
"B" Panel Opening
Figure 2-6. Panel Opening for Mounting "B" Bezel
It is not necessary to remove the Bezels when mounting the unit. The "B" Bezel protrudes from
the opening, and the "A" Bezel is positioned against the inside of the panel opening. The bracket
should retain the uni
anel. t so the "A" Bezel is held firmly against the inside of the p