MagTek IntelliStripe 310™ User Manual
Page 12
Advertising
IntelliStripe 310 Command Reference
6
Response Message Data:
Byte Field
Description
1
Property Type
Property Type definition follows
2
Property ID
Property ID identifies the property
3
Property Value
Value of the property
The property type field is the same as defined in the request message data. Only valid property
types are returned. The property type None is never returned. If the property type is Dword, the
format of the property value is in the Intel LSB,MSB (Little Endian) layout. For example Dword
value 0x12345678 is formatted as 0x78 0x56 0x34 0x12. Four bytes are always returned.
Response Message Result Codes:
Success = 00 (Hex)
The command completed successfully.
Failure = 01 (Hex)
The command failed.
Advertising