Section 5. led application, Get/set property commands – MagTek IntelliStripe 310™ User Manual
Page 29
Advertising
23
SECTION 5. LED APPLICATION
Application ID: 81 (Hex)
Description:
This application deals with the host controlled LED.
GET/SET PROPERTY COMMANDS
Get Property Command ID: 00 (Hex)
Set Property Command ID: 01 (Hex)
Description:
These commands are used to retrieve and set the value of application properties. Details of these
commands are described in the Generic command section of this document. The following
describes each property this application supports.
Advertising