MagTek IntelliStripe 310™ - Manual (Page 21)

Section 4. Magnetic Stripe Application
15
NOTIFY READ TRACK PROPERTY
Property ID: 01 (Hex)
Property Type: Dword
Power Up/Reset Value: 2 (Track 2)
Get/Set support: Both
Description:
This property contains the track number that is used when the Notify Read State property is set
to the GET TRACK DECODE DATA state. This is the track that is sent in the notification
message when a card is read.
Values:
Value Notify Read Track
1 TRACK 1
2 TRACK 2
3 TRACK 3
Example Set Property Request:
Field MTYP APPL CMND RC PTYP PID
Byte 1 2 3 4 5 6
Value (Hex) 00 01 01 00 01 01
Field PVAL
Byte
7 - 10
Value (Hex) 03 00 00 00 (TRACK 3)
Example Set Property Response:
Field MTYP APPL CMND RC
Byte 1 2 3 4
Value (Hex) 40 01 01 00