Section 3. device application, Get/set property commands – MagTek IntelliStripe 310™ User Manual
Page 15
Advertising
9
SECTION 3. DEVICE APPLICATION
Application ID: 00 (Hex)
Description:
This application deals with device functionality.
GET/SET PROPERTY COMMANDS
Get Property Command ID: 00 (Hex)
Set Property Command ID: 01 (Hex)
Description:
These commands are used to retrieve and set the value of application properties. Details of these
commands are described in the Generic command section of this document. The following
describes each property this application supports.
Advertising