MagTek MINI MICR WEDGE - Manual (Page 12)

MINI MICR WEDGE with 3-Track MSR
4
4.
On the interface cable, connect female DIN connector to the keyboard cable. Pin lists
and connector illustrations are shown in Appendix E.
5.
On the interface cable, connect the male DIN connector to the PC.
6.
On the AC power adapter, connect the jack to the plug on the MICR Reader.
7.
On the AC power adapter, connect the plug to the wall outlet.
8.
Power the PC on. The LED indicator on the MICR Reader should turn on to a steady
green. The LED indicator is located below the slot where the check is first inserted for
reading.
Caution
Do not place the MICR Reader within 6 inches of a computer
monitor or power supply. These devices may cause undesirable
interference with the check reading operation.