MagTek MINI MICR WEDGE - Manual (Page 27)

Section 4. Commands
19
SA - SAVE COMMAND
All changes are considered temporary until the Save command is executed. The Save command
saves all changes to the MICR Reader memory and makes them permanent. The MICR Reader
will execute the command but it will not reply. To execute, send the SA command followed by a
carriage return as follows:
SA<ENTER>
RS - RESET COMMAND
The Reset command resets the MICR Reader firmware to the normal operating state of waiting for
a check or card to be read. To execute, send the RS command followed by a carriage return as
follows:
RS<ENTER>