Led indicator, Card swipe procedure, Tables – MagTek MINI MICR WEDGE User Manual
Page 14
Advertising
MINI MICR WEDGE with 3-Track MSR
6
LED INDICATOR
Table 3-1 describes the LED indicator conditions for check and card reading operations. The
LED indicator is located below the slot where the check is first inserted for reading.
Table 3-1. LED indicators
LED INDICATOR
DESCRIPTION
OFF Power
off
SOLID GREEN
Ready to read check or card
OFF
→ SOLID RED
Check or card read error
OFF
→ SOLID GREEN
Good read
FLASH GREEN
Needs initialization*
FLASH RED/GREEN
Data sensor blocked (motor does not run)*
FLASH RED
Motor sensor blocked (motor does not run)*
FLASH GREEN FAST
Monitor mode (factory use only)*
*Refer to “Appendix C. Troubleshooting Guide.”
Advertising