Aalborg DFC Digital - Manual (Page 44)

APPENDIX 6
NOTE: Follow Return Procedures In Section 1.3.
41
WARRANTY
Aalborg
7 Mass Flow Systems are warranted against parts and workmanship
for a period of one year from the date of purchase. Calibrations are warrant-
ed for up to six months after date of purchase, provided calibration seals
have not been tampered with. It is assumed that equipment selected by the
customer is constructed of materials compatible with gases used. Proper
selection is the responsibility of the customer. It is understood that gases
under pressure present inherent hazards to the user and to equipment, and
it is deemed the responsibility of the customer that only operators with basic
knowledge of the equipment and its limitations are permitted to control and
operate the equipment covered by this warranty. Anything to the contrary will
automatically void the liability of Aalborg
7 and the provisions of this warran-
ty. Defective products will be repaired or replaced solely at the discretion of
Aalborg
7 at no charge. Shipping charges are borne by the customer. This
warranty is void if the equipment is damaged by accident or misuse, or has
been repaired or modified by anyone other than Aalborg
7 or factory author-
ized service facility. This warranty defines the obligation of Aalborg
7 and no
other warranties expressed or implied are recognized.
TRADEMARKS
Aalborg7 is a registered trademark of Aalborg7 Instruments.
Buna7 is a registered trademark of DuPont Dow Elastometers.
Kalrez7 is a registered trademark of DuPont Dow Elastomers.
VCR7 is a registered trademark of Swagelok Marketing Co.
Viton7 is a registered trademark of Dupont Dow Elastometers L.L.C.
ƽ CAUTION:
This product is not intended to be used in life support applications!