Horner APG XL4 OCS HE-ETN300 - Manual (Page 8)

CH.1 SUP0740-07
11/30/2009 Page 8 of 98 # 958
¾ FTP & HTTP protocols are supported only by OCS Models with built-in Ethernet and
Compact Flash/Micro SD, such as OCS451, OCS551, OCS651, NX221, NX251, QX351,
QX451, QX551, QX651, QX751 and XL6e.
¾ * SMTP is supported by OCS that have inbuilt ethernet port like the NX, QX, XL6e.
1.2 Ethernet Network Example
Ethernet Module configuration is done through Cscape Programming Software. Figure 1.1
illustrates an example of a network containing ETN200 and ETN300.
Figure 1.1– Example of an Ethernet Network
Table 1.2 – Ethernet Module Protocols and Features
Ethernet Module Types Protocol /
Feature
Protocol / Feature Description
ETN100 ETN116 ETN200 ETN300
ICMP Ping Internet Control Message Protocol
√ √ √ √
EGD (Peer) GE Fanuc Ethernet Global Data
√ √ √ √
SRTP Server
GE Fanuc Service Request
Transfer Protocol
√ √ √ √
Modbus TCP
Slave
Modbus over Ethernet
√ √ √ √
CsCAN TCP
Server
Horner APG CsCAN over
Ethernet
√ √
Ethernet / IP
Server
ODVA CIP over Ethernet
√ √
¾ FTP
Server
File Transfer Protocol
√ √
¾ HTTP
Server
HyperText Transfer Protocol (Web
Server)
√ √
Half / Full
Duplex
Auto-Negotiated Ethernet Mode
√ √
* SMTP Email √
10 / 100 Mbps Auto-Negotiated Ethernet Speed
√ √
Extended
Registers
Access to %R2049-%R9999 √
CAT5 UTP Ethernet
Cable
ETN300
ETN200
CDC200
CCU
(Conveyor
Controller)
Series
90-30
CAN
Cable
CsCAN
Network
RCS Mini OCS OCS #2
OCS #1
Ethernet Hub
PC
(Running
Cscape)
OCS #3
Series
90-30
CPU364
Note: An Ethernet Hub or Multicast
Router is recommended for Ethernet
Global Data (EGD) protocol, because a
Switch might not be able to pass
multicast messages. Ethernet
Network