Document Outline

• PREFACE
• LIMITED WARRANTY AND LIMITATION OF LIABILITY
• TABLE OF CONTENTS
• CHAPTER 1: INTRODUCTION
  • 1.1 Ethernet Modules Overview
  • 1.2 Ethernet Network Example
  • 1.3 Ethernet System Requirements and Interoperability
  • 1.4 Ethernet Module Specifications
  • 1.5 Additional Technical Resources
  • 1.6 Technical Support
• CHAPTER 2: INSTALLATION
  • 2.1 Built-In Ethernet Module
  • 2.2 User-Installed Ethernet Module
  • 2.3 Network Administrator Installation Notes
    • 2.3.1 UDP and TCP Ports
    • 2.3.2 EGD Unicast and Multicast IP Addressing
    • 2.3.3 Internet Connectivity
    • 2.3.4 IMPORTANT: Wireless Network Considerations
  • 2.4 Safety
• CHAPTER 3: GENERAL CONFIGURATION
  • 3.1 Ethernet Module Configuration
  • 3.2 Ethernet Module IP Address
    • 3.2.1 Static IP Address
    • 3.2.2 Static IP Address with CAN ID
    • 3.2.3 IP Address from OCS Register
• CHAPTER 4: CSCAN OVER ETHERNET PROTOCOL
  • 4.1 CsCAN over Ethernet Overview
  • 4.2 CsCAN over Ethernet Configuration
  • 4.3 CsCAN over Ethernet Operation
  • 4.4 CsCAN over Ethernet Downloading Precautions
    • 4.4.1 How to Prevent Losing Communication
    • 4.4.2 How to Recover from Lost Communication
  • 4.5 CsCAN over Ethernet Security
• CHAPTER 5: INTERNET CONTROL MESSAGE PROTOCOL (ICMP)
  • 5.1 ICMP Overview
  • 5.2 ICMP Configuration
  • 5.3 ICMP Operation
• CHAPTER 6: ETHERNET GLOBAL DATA PROTOCOL (EGD)
  • 6.1 EGD Overview
  • 6.2 EGD Terminology
  • 6.3 EGD Configuration
  • 6.4 EGD Produced Exchange Configuration
    • 6.4.1 Creating EGD Produced Exchanges
    • 6.4.2 Defining EGD Produced Exchange I/O Blocks
  • 6.5 EGD Consumed Exchange Configuration
    • 6.5.1 Creating EGD Consumed Exchanges
    • 6.5.2 Defining EGD Consumed Exchange I/O Blocks
  • 6.6 EGD Operation
  • 6.7 EGD Status Words
    • 6.7.1 EGD Produced Exchange Status Words
    • 6.7.2 EGD Consumed Exchange Status Words
  • 6.8 EGD Example 1
    • 6.8.1 EGD Example 1 – Configuring Node 1
    • 6.8.2 EGD Example 1 – Configuring Node 2
    • 6.8.3 EGD Example 1 – Starting EGD Communication between Node 1 and Node 2
  • 6.9 EGD Example 2
    • 6.9.1 EGD Example 2 – Adding a Status Block
    • 6.9.2 EGD Example 2 – Adding an OCS Timestamp Block
    • 6.9.3 EGD Example 2 – Adding a Filler Block
• CHAPTER 7: SERVICE REQUEST TRANSFER PROTOCOL (SRTP)
  • 7.1 SRTP Overview
  • 7.2 SRTP Configuration
  • 7.3 SRTP Operation
• CHAPTER 8: MODBUS TCP SLAVE PROTOCOL
  • 8.1 Modbus Overview
  • 8.2 Modbus Configuration
  • 8.3 Modbus Operation
• CHAPTER 9: ETHERNET/IP PROTOCOL
  • 9.1 Ethernet/IP Overview
  • 9.2 Ethernet/IP Configuration
  • 9.3 Ethernet/IP Operation
• CHAPTER 10: FTP SERVER PROTOCOL
  • 10.1 FTP Overview
  • 10.2 FTP Configuration
  • 10.3 FTP Operation
  • 10.4 FTP File Accessing
• CHAPTER 11: HTTP SERVER PROTOCOL
  • 11.1 HTTP Overview
  • 11.2 HTTP Configuration
  • 11.3 HTTP Operation
  • 11.4 Web Content - Storing
  • 11.5 Web Content - Dynamic Data
    • 11.5.1 Static Html Files
    • 11.5.2 Dynamic Html Files – Reading OCS Register Data (readreg.htm)
      • 11.5.2.1 REG PARAMETER – OCS REGISTER READ REFERENCE
      • 11.5.2.2 FMT PARAMETER – OCS REGISTER READ FORMAT
      • 11.5.2.3 RFS PARAMETER – OCS REGISTER READ AUTO-REFRESH
      • 11.5.2.4 FNT PARAMETER – OCS REGISTER READ FONT
    • 11.5.3 Dynamic Html Files – Writing OCS Register Data (writereg.htm)
      • 11.5.3.1 REG PARAMETER – OCS REGISTER WRITE REFERENCE
      • 11.5.3.2 FMT PARAMETER – OCS REGISTER WRITE FORMAT
  • 11.6 Web Content - Authoring
    • 11.6.1 Web Server Example Applications
    • 11.6.2 Web Authoring Reference Material
    • 11.6.3 Web Authoring Tools
• CHAPTER 12: Email (SMTP Protocol)
  • 12.1 Overview
  • 12.2 Email Configuration:
  • 12.3 Email Status
• CHAPTER 13: ASCII over TCP/IP
  • 13.1 Overview
  • 13.2 Configuration
  • 13.3 Sending ASCII characters to the client
  • 13.4 Receiving ASCII characters from the client
  • 13.5 Status Information
• INDEX
• TABLE OF FIGURES