Flytec 3040/TT34 * - Manual (Page 19)

Operation manual Flytec 3040 Balloon 18
14.2 QNH - correction
(For Software 59418)
21
◄
◄
549
1. Select altimeter display to ALT m
1. Press altimeter key for 4sec. until display
ALTI ft
QNH hpa
ALTI m
4 Sec.
is blinking.
3. Press all 4 red marked keys together for 1 sec.
▼
▲
4. Adjust QNH offset value with the UP or DOWN
key. One step = 0.1 hPa.
ALTI ft
QNH hpa
5. Press ALT key to store QNH correction and to
exit option mode.
ALTI m
ALTI ft
QNH hpa 6. Press ALT key again to exit also ALT set
mode
ALTI m
7. Controlling QNH relation to Altitude