Flytec 3040/TT34 * - Manual (Page 4)

Operation manual Flytec 3040 Balloon 3
2. Operating Philosophy
Flytec’s philosophy is to produce user-friendly instruments. When you turn on the
instrument the instrument will go through a self test and proceed to the Normal flight
mode. The key functions of Flytec 3040 is also based on simple principles.
The keyboard interprets two keystrock times:
1. Short press Æ. Approximate 1 second
Example: Repeatedly pressing the yellow altimeter key, switch the altimete display forward
ALTI ft. / QNH hPa / ALT. The appropriate display is signaled by indicator arrow.
2. LongpressÆ
longer then 3 Second
Example: A long press on the yellow altimeter key, during altimeter in feet is displayed, will
activate the altimeter set mode in feet.
86.5
◄
◄
◄
2645
1.4
Functions- and Display
select keys
Stopwatch
In setmode
Æ
Up / Down adj. Keys
Audio functions
keys
2.1 Operating mode
The device has three operating modes: 1.Normal flight mode. 2. setting mode and 3. a
configuration mode to adjust or configuring the instrument.
2.1.1 Normal flight mode
After switching on, the 3040 instrument works in the normal flight mode. In this mode, the
altitude, temperature or time and the vertical speed is continuously displayed.
2.1.2 Setting mode
The setting mode is entered by a long press of the respective function key. The relevant
display field will flash and can be altered with the Arrow Keys. Pressing the arrow keys to
accelerate the setting.
A short press of the corresponding source function key stores the selected value and
returns to normal operating condition.